Capacity:
- 10,000 pound lift and carry capacity
- 180° swing (90° each side of center)
Dimensions:
- GVW 34,000 lbs. with hirail gear
- Length 207” | Width 97-3/8″ | Height 130”
| Engine Make | Cummins |
| Max. Horsepower | 168 @ 1900 rpm |
| Peak Torque (Foot-Pounds) | 540 @ 1500 rpm |
| Governed RPM | 2300 rpm |
| Stall Multiplication Ratio | 1.932:1.00 |
| Drive | Offset |
| Drive Ratio | 0.965:1.00 |
| Pump Drive Ratio | 0.951:1.00 |
| Oil Filler | Remote mounted |
| Type | “Six Speed” Power Shift |
| Number of Drive Gear Ratios | 3 |
| Number of Gear Ranges | 2 |
| Axle Disconnect | Rear Axle |
| Clutch Cutout | Standard |
| Tires | 14.00 x 24 |
| Standard Wheels | Single dish, 10 W Rim inside to inside of tires 65 inches (Loaded Section) |
| Optional Wheels | Dual dish, 8 TG or 10 W Rim inside to inside of tires 75 inches (loaded section) |
| Type | Rigid Frame with Steerable Axles |
| Control | Full power Hydraulic |
| Selectable Modes | 4 Wheels, Crab, Front Only and Rear Only |
| Turning Radius (Curb Clearance) | 20 feet 6 inches |
| Cylinders | Double acting, 4″bore, 7.63″ stroke, chrome plated piston rods. |
| Type | Outboard Style Single Caliper Disc Brakes |
| Disc Diameter | 19 in |
| Location | Axle Wheel Ends |
| Actuation | Dual Circuit System Air over Hydraulic |
| Control | Foot control in Cab |
| Type | Mechanical Drum |
| Diameter | 10 in |
| Width | 2 in |
| Location | Transmission Output Yoke |
| Actuation | Cable |
| Control | Over center lever in cab |
| Voltage | 12 V |
| Alternator Output | 160 A |
| Standard Gauges | Air Pressure Torque Converter Pressure Engine Oil Pressure Engine Water Temperature Fuel Tank Level Hourmeter Torque Converter Oil Temperature Voltmeter |
| Battery | 1900 Cold Cranking Amps with Disconnect Switch |
| Type | Dry, Two Stage (Centrifugal Precleaner, Paper Main Element) |
| Restriction Indicator | Standard, Mounted alongside air cleaner |
| Tank Capacity | 43 gal |
| Filters | Spin on Primary Strainer and Spin on Secondary Filter |
| Reservoir | 75 Gallon Removable Hydraulic Tank with Removable Cleanout Cover and Pad Lockable Filler/breather |
| Suction Strainers | 100 Mesh Strainers Mounted in the Hydraulic Tank on Each Pump Suction Line |
| Primary Pump | Double section gear type, direct driven from accessory drive on torque converter. Supplies oil flow for Boom, Attachment, and Hi-rail functions. |
| Secondary Pump | Double section vane type, direct driven from accessory drive on torque converter. Supplies oil flow for Steering and Remote controls. |
| Primary | Two spool, hydraulic pilot operated with manual override |
| Secondary | Five spool, hydraulic pilot with manual override |
| Controls | Low Effort Hydraulic Remote Controls for Boom Lift, Boom Swing, Attachment Tilt, and Auxiliary Attachment Function, with Manual Override on Control Valves. |
| Boom Lift | 2 Double acting 6″ bore x 23.25″ stroke with Hydraulic Holding Valves |
| Attachment Tilt | 1 Double acting 6″ bore x 25.5 stroke with Hydraulic Holding Valves |
| Filters | Return Line Cartridge Type, 10 micron nominally rated element with Magnetic Element |
| Swivel | 9 Port Hydraulic |
| Type Drive | Cylinder, Chain and Sprocket |
| Rotation | 180 degrees (90 degrees each side of center) |
| Speed | Equivalent to 3.5 rpm |
| Weight | 34,000 lbs with Hi-rail |
| Chassis Length | 207 in |
| Chassis Width | 97 3/8 in |
| Height | 130 in |
| Forward and Reverse+ | Low Range | High Range |
| 1st | 1.5 | 4.5 |
| 2nd | 3.5 | 10 |
| 3rd | 10 | 28 |
